How to fix custom wardrobe? Comprehensive analysis of installation methods and precautions
Customized wardrobes are a common choice in modern homes, and their fixing methods are directly related to the safety and stability of use. This article will combine the hot topics and user concerns on the Internet in the past 10 days, and provide a structured analysis from aspects such as fixing methods, tool preparation, and frequently asked questions to help you easily complete wardrobe installation.
According to the installation environment and usage requirements, the main fixing methods of custom wardrobes include the following:
| Fixed method | Applicable scenarios | advantage | shortcoming |
|---|---|---|---|
| Expansion screw fixation | Concrete or solid brick walls | Strong load-bearing capacity and high stability | Need to drill holes and damage the wall |
| Self-tapping screw fixation | Light steel keel or wooden base | Quick installation and low cost | Limited load-bearing capacity |
| hanging fixed | High-rise slab or suspended ceiling structure | Space saving and beautiful | Requires professional installation |
| Anchor bolt fixation | The ground is uneven or the height needs to be adjusted | Adjustable and adaptable | Complex installation |
Here are the common tools and materials needed to secure a custom wardrobe:
| Tools | Material |
|---|---|
| electric drill | Expansion screw (M8-M12) |
| spirit level | Self-tapping screws (length 40-60mm) |
| screwdriver set | Corner code or L-shaped connector |
| tape measure | Moisture-proof gasket |
Step 1: Locate and mark
Use a level and tape measure to locate the wardrobe and mark drilling points on the wall and floor to ensure symmetry.
Step 2: Drilling
Drill holes according to the marked points, and the depth should be slightly longer than the length of the expansion screw (usually 5-8cm). If it is a lightweight wall, special anchors need to be used.
Step 3: Secure the back panel
Align the backboard of the wardrobe with the wall, fix the top and bottom with expansion screws, and add screws 50cm apart in between.
Step 4: Reinforce the side panels
Connect the side panels and the wall through corner codes to ensure that the cabinet is vertical and not tilted. If it is a free-standing wardrobe, anchor bolts need to be installed on the ground.
| question | reason | Solution |
|---|---|---|
| Wardrobe shaking | Insufficient fixing points or loose screws | Add fixing points and use anti-loosening washers |
| Door panel tilts | Uneven ground or installation error | Adjust the anchor bolts and recalibrate the level |
| Wall cracks | The hole is too large or the wall material is loose | Replace expansion screws with larger sizes or use chemical anchors |
1. Check the wall structure before installation and avoid the location of wires and water pipes.
2. For high-rise residences, it is recommended to use hanging fixation to lower the center of gravity.
3. The children's room wardrobe needs additional reinforcement to prevent climbing and tipping.
4. Regularly check whether the screws are loose after installation, especially in earthquake-prone areas.
With the above steps and precautions, you can easily complete the fixed installation of your custom wardrobe. If you need more professional services, it is recommended to contact the brand’s after-sales or professional installation team.
check the details
check the details
en
